
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-50 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X80-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you shorten the forward stroke on-site across a 30 to 80 mm window without swapping shims or parts. The retract motion remains full length.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End shock is handled by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X80-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 80 mm during prototype runs to find the exact 147 N safe working contact point without machining new spacers.
Adjust the mechanical end stop for different carton depths; the fixed NBR bumper absorbs the end shock for each unique format change.
Choose it when setup-heavy lines require on-site stroke tuning between 30 and 80 mm.
Confirm the bore, 80 mm maximum stroke, 50 mm window, M5x0.8 port, and female M5x0.8 rod-end thread. This SKU lacks a piston magnet, so it cannot take a magnetic switch; specify the -S variant for reed or electronic sensing. Note that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end. For a held load, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the external R (M8x1.25) screw shortens the extend end position anywhere between 30 and 80 mm. The retract remains full stroke, and the adjuster sets the mechanical stop without changing the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.