
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-10 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 75 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-10 is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where larger profile variants fail. An external M8x1.25 adjuster screw lets you dial the extend stop directly on the machine between 75 and 85 mm without swapping shims or parts.
This 25 mm bore unit runs on an M5x0.8 port and relies on a fixed NBR bumper at each end to decelerate the stroke. The bumper is not an adjustable air cushion, so for high-energy cycles you should slow the approach or add an external shock absorber. This specific SKU ships without a piston magnet, meaning it cannot host reed or electronic switches; order the -S variant if your fixture requires position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 75 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 75-85 mm extend stop during machine changeovers to accommodate different part heights without fabricating new spacers.
Use the M8x1.25 screw to iterate the end position during prototype runs, finding the exact 75-85 mm extension before locking the setup.
Choose this model if your setup requires on-site stroke tuning to perfect a 75-85 mm extend position. Confirm your bore, 85 mm maximum stroke, 10 mm window, M5x0.8 port, female rod thread, and lack of magnet before ordering.
Remember that a plain SDAJ does not hold a load when air is lost or the valve centers—the piston drifts, and the fixed NBR bumper only decelerates near the end of travel. If your application demands load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The adjustment screw does not alter these force values.
Turning the external R (M8x1.25) screw shortens the extend end position from the 85 mm maximum down to 75 mm. The screw acts purely as a mechanical stop and does not lock the piston mid-stroke; without air pressure, the cylinder cannot hold its load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.