
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-10S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 75 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-10S is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop from 75 to 85 mm on-site. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 75 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly for varying package depths, using the integrated magnet to confirm the extend endpoint before the fixed NBR bumper absorbs the end shock.
Speed up product changeover on automated lines by turning the M8x1.25 screw to shift the extend endpoint by up to 10 mm, avoiding the need to swap out entire actuators.
Choose this specific model if your fixture requires precise on-machine extend tuning within the 75-85 mm window.
Confirm your parameters: 25 mm bore, 85 mm maximum stroke, 10 mm adjustability, M5x0.8 port, and a female M5x0.8 rod-end thread. The -S code denotes the integrated magnet for position sensing. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centres; the fixed NBR bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a mid-stroke lock. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 343.6 N and pull to 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa. The adjustable stop does not alter these force values.
The external M8x1.25 screw shortens the extend stroke by up to 10 mm, providing a usable range of 75 to 85 mm. Retract remains at the full 85 mm. The -S suffix indicates a built-in piston magnet, allowing you to mount AirTAC reed or electronic switches directly into the body sensor grooves for position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.