
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the forward stroke down by up to 20 mm directly on the machine, yielding a usable extend range of 65 to 85 mm without swapping shims or parts. The retract motion remains full length.
This specific SKU includes a male-threaded M8x1.25 piston rod for straightforward tool mounting and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 65 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Swap product sizes on a packaging line by turning the M8x1.25 R screw to shorten the forward stroke, eliminating the downtime of physically swapping cylinder shims.
Use the male M8x1.25 rod to mount a probe or clamp, then fine-tune the end position during initial machine commissioning until the exact 12.5 kg vertical lift target is met.
Choose this model if your fixture requires frequent changeovers or trial positioning within the 65 to 85 mm window. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers—the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Confirm your spec needs: 25 mm bore, 85 mm max stroke, 20 mm adjust window, M5x0.8 port, male M8x1.25 rod thread, and no magnet.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
Turning the external R (M8x1.25) screw mechanically shortens the extend end position anywhere between 65 and 85 mm. The screw is only a stop and does not alter force. The cylinder cannot hold a load on air loss; use an external rod lock or pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.