
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-40 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-40 is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjustment screw that dials the extend stop anywhere between 45 and 85 mm on-site. Retract travel always uses the full 85 mm length.
A short riveted body minimizes axial mounting depth in tight fixtures, while a fixed NBR bumper at each end absorbs end-of-stroke shock without requiring tuning. This specific SKU ships without a piston magnet, so it cannot host reed or electronic switches; add the -S option if sensing is required.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 45 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 45 to 85 mm extend point during initial tooling commissioning without machining custom spacers or swapping components.
Turn the M8x1.25 screw to adapt the extend stop for different part lengths on packaging lines, cutting setup time between product runs.
Choose this adjustable-stop model for setup-heavy lines requiring frequent trial positioning or rapid product changeovers. Confirm your parameters: 25 mm bore, 85 mm maximum stroke, 40 mm adjust window, M5x0.8 port, female rod-end thread, and no magnet. Remember that a plain cylinder drifts on air loss or valve centring; the fixed bumper only decelerates near the end of travel and is not a lock. Specify an external rod lock or pilot-operated check valve for load holding without live pressure.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The external M8x1.25 screw acts as a mechanical stop, letting you shorten the extend stroke from the 85 mm maximum down to 45 mm. It does not alter force or lock mid-stroke; the piston drifts if air is lost, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.