
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-50B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-50B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M8x1.25 adjuster screw lets you dial the outward stroke anywhere between 35 and 85 mm directly on the machine, eliminating the need for shims or part swaps.
This unit ships with a male-thread M8x1.25 piston rod and uses an M5x0.8 air port. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a load-holding lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 35 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 85 mm via the M8x1.25 screw during machine setup to accommodate varying part widths without swapping hardware.
Fine-tune the outward reach in trial runs to find the exact contact point, leveraging the 12.5 kg vertical lift margin for safe part manipulation.
If your application requires on-machine stroke tuning during frequent changeovers, this 35-85 mm adjustable window is ideal.
Confirm the 85 mm maximum stroke, 50 mm adjust window, M5x0.8 port, and male M8x1.25 rod thread for your mounting setup. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; choose the -S variant if sensing is required. Furthermore, a plain cylinder drifts when air is lost or the valve is centered, so utilize an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 343.6 N. The theoretical maximum push force is 50 kgf at 1.0 MPa.
Turning the external R screw shortens the extend end position by up to 50 mm, allowing the stroke to be set anywhere between 35 and 85 mm. The retract stroke remains full, and the screw acts only as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.