
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-50S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X85-50S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M8x1.25 adjuster screw lets you set the extend position anywhere between 35 and 85 mm directly on the machine, avoiding part swaps.
The short riveted body minimizes axial mounting depth where round-body or profile cylinders will not fit. A fixed NBR bumper decelerates the stroke end, but is not an adjustable air cushion. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, and operates at speeds of 30-500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 85 mm |
| Adjustable range | 35 – 85 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 85 mm during machine changeover to accommodate different part heights without fabricating new spacers.
Set the precise 12.5 kg vertical contact force for pressing carton flaps, adjusting the 50 mm window as board thickness varies.
Use the M8x1.25 screw to fine-tune the extend endpoint during prototyping, finding the exact 147 N safe working contact point.
Choose this model if your fixture requires on-site stroke tuning across a 35-85 mm window.
Confirm the specifications: 25 mm bore, 85 mm max stroke, 50 mm adjust window, M5x0.8 port, built-in magnet (S), and female M5x0.8 rod-end thread. Note that a plain cylinder does not hold a load on air loss or valve centring; the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The M8x1.25 screw shortens the extend stop by up to 50 mm, yielding a usable 35-85 mm range. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.