verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.

  • BoreØ25 mm
  • Max stroke85 mm
  • Adjustable range10–85 mm
  • Adjuster threadM8×1.25
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$53.26 $60.76Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ25 stroke, mounting and version on one page All SDAJ25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S

The AirTAC SDAJ25X85-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M8x1.25) screw, you can dial the outward stroke down by up to 75 mm directly on the machine, yielding a usable extension range of 10 to 85 mm without swapping shims or parts.

Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders simply will not fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke end; this is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic switches for precise end-position signaling.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ25 mm
Max stroke85 mm
Adjustable range10 – 85 mm
Adjuster thread (R)M8×1.25
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM5×0.8 F / M8×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa206 N206 N
0.7 MPa289 N—
Max (@1.0 MPa)42 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S

SDAJCompact double-acting cylinder with adjustable stroke.
25Bore size in mm.
×85Maximum stroke length in mm.
-75Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S Is Used

swap_horiz

Product Changeover Jigs

Dial the extend stop from 10 to 85 mm on the fly to accommodate varying part widths on a single fixture, avoiding manual shim adjustments during line setups.

precision_manufacturing

Adjustable Ejector Pins

Fine-tune the ejection distance precisely to the part height, utilizing the M8x1.25 adjuster screw to set the exact push-off point without changing the cylinder body.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S the Right Cylinder?

Choose this specific configuration if your fixture requires frequent on-site stroke tuning during setup or product changeovers. Confirm the 85 mm maximum stroke, 75 mm adjust window, M5x0.8 port, female M5x0.8 rod-end thread, and the -S magnet for switch readiness. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the bumper only decelerates near the stroke end. For a held load without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M8×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S FAQ

The external stop screw does not alter these force values.

The R (M8x1.25) screw shortens the extend stroke by up to 75 mm, allowing usable extension between 10 and 85 mm; retract remains full. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing, while a fixed NBR bumper handles end deceleration.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X85-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ25X85-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.