
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-10B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X90-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M8x1.25 adjuster screw lets you dial the extend end-position on the machine between 80 and 90 mm without swapping parts.
This variant features a male M8x1.25 piston rod thread and a 10 mm piston rod. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 90 mm |
| Adjustable range | 80 – 90 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 80 to 90 mm extend stop during machine changeovers to accommodate different part heights without fabricating new spacers.
Rely on the male M8x1.25 rod and the external adjuster to fine-tune the end stop during R&D trials before locking down a final mechanical setup.
Choose the 25 mm bore when the smaller variant risks stalling under payload friction.
The 10 mm adjustable window is ideal for setups requiring trial positioning or frequent changeovers. Confirm your parameters: 25 mm bore, 90 mm max stroke, 10 mm adjust window, M5x0.8 port, male M8x1.25 rod thread, and no magnet. A plain cylinder drifts when air is lost or the valve is centered; the bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 343.6 N and pull to 288.6 N. The theoretical maximum push is 50 kgf at 1.0 MPa.
Turning the M8x1.25 R screw shortens the extend stroke by up to 10 mm, giving a usable range of 80 to 90 mm. It acts purely as a mechanical stop and does not alter force. It will not hold a load on air loss; use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.