
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-10S is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X90-10S is a compact double-acting double-rod cylinder featuring an external M8x1.25 adjuster screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere from 80 to 90 mm without swapping shims or parts, making it ideal for trial positioning and rapid changeovers. The short riveted body drastically saves axial mounting depth where a larger profile cylinder will not fit.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke end.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 90 mm |
| Adjustable range | 80 – 90 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 90 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Leverage the 10 mm adjustment window to test sensor trigger points and end-of-travel distances on prototype assembly stations.
Choose this model if your fixture requires on-site stroke tuning between 80 and 90 mm.
This unit features an M5x0.8 port, a female M5x0.8 rod-end thread, and the -S magnet option for position sensing. Remember that a plain cylinder does not hold its load when air is lost or the valve is centred—the piston drifts and the fixed bumper only decelerates near the end of the stroke. For secure load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The M8x1.25 R screw shortens the extend stop by up to 10 mm, giving a usable forward range of 80 to 90 mm; retract remains full stroke. The included -S magnet works with AirTAC reed or electronic solid-state switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.