
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-20B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X90-20B is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. An external M8x1.25 adjuster screw lets you dial the extend stop down by 20 mm, yielding a usable 70 to 90 mm range directly on the machine.
The short riveted body minimizes axial mounting depth where round-body or profile cylinders will not fit. This specific configuration includes a male M8x1.25 piston rod thread for direct mounting, and the bore is governed by an M5x0.8 air port. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 70 and 90 mm during machine setup to accommodate different part heights without swapping out the entire actuator assembly.
Adjust the extend endpoint on the packaging line to fold varying carton sizes on the fly, relying on the fixed NBR bumper to absorb the end shock.
When sizing this 25 mm bore actuator, evaluate both neighboring options. Stepping up to the SDAJ32 provides 402.1 N at 0.5 MPa, offering a substantially higher load capacity if your air supply is limited.
This SKU is ideal for operators who need on-machine stroke tuning during frequent changeovers, as the extend window can be fine-tuned without shims. Confirm your requirements for a 90 mm maximum stroke, 20 mm adjustment window, M5x0.8 port, and the male M8x1.25 rod thread. Note that this configuration lacks a piston magnet, so it cannot support sensing switches. Furthermore, a plain cylinder does not hold its load on air loss or valve centering; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and a speed range of 30-500 mm/s.
Turning the R (M8x1.25) adjuster screw shortens the extend stroke by up to 20 mm, allowing you to set the endpoint anywhere between 70 and 90 mm. This SKU does not include a piston magnet, so it cannot accept reed or electronic switches. You would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.