
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-40 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X90-40 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M8x1.25) screw lets you dial the outward stroke down from the 90 mm maximum to any point between 50 and 90 mm directly on the machine, eliminating the need for shims or part swaps during setup. Retract remains full length.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 50 to 90 mm via the M8x1.25 screw to accommodate varying part heights on machining fixtures without machining new spacers.
Set a precise mechanical end-stop for locating thin workpieces, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach shock without part damage.
When sizing this 25 mm bore actuator, evaluate your thrust requirements against its neighbours.
Choose this model if your fixture requires frequent on-site stroke tuning between 50 and 90 mm. Confirm your porting matches the bore-fixed M5x0.8 air connection and the female M5x0.8 rod-end thread. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; specify the -S option if sensing is required. Finally, remember the plain cylinder does not hold load on air loss or valve centring—deploy an external rod lock or pilot-operated check valve for suspended loads.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The adjustable stop does not alter these force values.
The external R (M8x1.25) screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 90 mm maximum down to 50 mm. It only sets the end position and is not a mid-stroke lock. This SKU has no magnet; you must select the -S variant to use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.