
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-40B is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X90-40B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M8x1.25) screw lets you dial the forward stroke down by up to 40 mm, yielding a usable extend range of 50 to 90 mm directly on the machine without changing parts.
This variant features a male-thread M8x1.25 piston rod for secure tool mounting and a short riveted body that saves axial depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support position sensing without upgrading to the -S option.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 90 mm |
| Adjustable range | 50 – 90 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fit the short riveted body into tight machine frames to push parts at 30-500 mm/s, relying on the fixed NBR bumper to absorb the shock of high-speed ejection cycles.
Choose the SDAJ25X90-40B if your fixture setup requires frequent on-machine stroke tuning between 50 and 90 mm.
Verify your installation parameters: the bore is 25 mm, the nominal stroke is 90 mm, the adjustment window is 40 mm, and the air port is M5x0.8. This unit includes the -B male M8x1.25 rod thread and operates at 30-500 mm/s. A plain pneumatic cylinder does not hold a load if air pressure drops or the valve centres; the piston will drift, and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and functions at speeds from 30 to 500 mm/s.
The external R (M8x1.25) screw mechanically limits the extend stroke, allowing you to set the forward position anywhere between 50 and 90 mm. This stop sets position only; it does not alter force or lock the piston mid-stroke. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must select the -S variant to enable sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.