
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-75 is a genuine double-acting COMPACT cylinder (Ø25mm bore) whose extend end-position is set by an external M8×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ25X90-75 is a compact double-acting double-rod cylinder engineered for on-site stroke modification. An external M8x1.25 adjuster screw lets you dial the extend stop anywhere between 15 and 90 mm, eliminating the need for shims or part swaps during commissioning.
Its short riveted body drastically reduces axial mounting depth, fitting into tight machine frames where larger profile cylinders cannot. The bore features a fixed NBR bumper at each end to absorb end-of-stroke shock, operating reliably at speeds from 30 to 500 mm/s. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ25X90-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø25 mm |
| Max stroke | 90 mm |
| Adjustable range | 15 – 90 mm |
| Adjuster thread (R) | M8×1.25 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M5×0.8 F / M8×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 206 N | 206 N |
| 0.7 MPa | 289 N | — |
| Max (@1.0 MPa) | 42 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 15-90 mm extend position on the fly during product family swaps, avoiding teardown when switching between fixture heights.
Fine-tune the pusher rod end-stop to handle varying carton widths on the line without changing out the entire actuator assembly.
When sizing this actuator, evaluate your force requirements bidirectionally. Choose this model if your fixture setup demands frequent trial positioning or changeovers within that 15 to 90 mm window.
Confirm your parameters: a 25 mm bore, 90 mm maximum stroke, 75 mm adjustment window, and an M5x0.8 port. The rod end features a female M5x0.8 thread. Keep in mind the fixed NBR bumper only decelerates the stroke end; a plain cylinder does not hold a load on air loss or valve centering. For suspended loads, you must integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ25 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj25-adjustable-cylinder
Quick checklist
The theoretical maximum push is 50 kgf at 1.0 MPa.
The external M8x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 90 mm maximum down to 15 mm. It does not alter the cylinder's force output, and the fixed NBR bumper remains non-adjustable.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.