
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X10-10S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 10 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X10-10S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 0 to 10 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth, fitting where round-body or profile cylinders cannot. The built-in -S piston magnet enables position sensing with AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke end without acting as a lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X10-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 10 mm |
| Adjustable range | 0 – 10 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the extend endpoint on packaging lines during format changes, using the M16x1.5 screw to adapt the stroke to varying carton depths on the fly.
Choose this configuration when your fixture requires on-site extend tuning within the 0-10 mm window. Confirm the 63 mm bore, 10 mm stroke, 10 mm adjustability, PT1/4 port, built-in magnet (S), and female M10x1.5 rod thread. Remember that a plain cylinder drifts on air loss or valve centering; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The external M16x1.5 screw shortens the extend endpoint by up to 10 mm, giving a usable 0-10 mm range without shims. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.