
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X10-10SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 10 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X10-10SB is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that fits where round-body or profile cylinders cannot. An external R (M16x1.5) adjustment screw lets you dial the extend stop down from 10 mm to 0 mm directly on the machine, eliminating shims or part swaps during changeover.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, plus a male M18x1.5 threaded rod end for secure mounting. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s, making it highly responsive for precise clamping and positioning tasks.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X10-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 10 mm |
| Adjustable range | 0 – 10 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in exact 0-10 mm clamping contact on machined parts using the R screw, ensuring precise force without swapping physical spacers.
Quickly reset the extend endpoint on-site for different product variants, leveraging the male M18x1.5 rod for rigid tooling attachment.
Choose this 10 mm stroke variant with the 10 mm window if your application requires micro-adjustments of the extend position within a 0-10 mm range.
Confirm the 63 mm bore, 10 mm stroke, 10 mm adjustment window, PT1/4 port, male M18x1.5 rod thread, and the -S magnet match your design. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered—the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push force is 318 kgf at 1.0 MPa.
The external M16x1.5 screw shortens the extend stroke by up to 10 mm, allowing you to set the stop anywhere from 0 to 10 mm. The included -S magnet enables position sensing with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.