verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke100 mm
  • Adjustable range90–100 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$117.21 $124.71Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S

The AirTAC SDAJ63X100-10S is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A built-in M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 90 and 100 mm without changing parts.

This thin riveted-body design saves axial mounting depth where larger profile cylinders cannot fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, operating effectively across a 30-500 mm/s speed range. Equipped with a piston magnet, it supports AirTAC reed or electronic solid-state switches for precise end-position verification.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke100 mm
Adjustable range90 – 100 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×100Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S Is Used

precision_manufacturing

Press Fit Dial-In

Ideal for pressing bearings where the final 10 mm of extend needs micro-adjustments on the machine to achieve perfect seating without swapping shims.

packaging

Carton Flap Folding

Provides adjustable reach for varying box heights, allowing operators to tweak the 90-100 mm extend stop quickly during packaging changeovers.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S the Right Cylinder?

When sizing this actuator, evaluate your force requirements both ways.

Choose this specific model if your assembly requires fine-tuning the extend position by up to 10 mm during commissioning. Confirm your setup needs a PT1/4 air port, a 20 mm rod with a female M10x1.5 end thread, and the installed magnet for sensing. Remember that a standard compact cylinder cannot hold a load if air pressure drops; the bumper only decelerates the stroke end rather than locking it. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 90–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S FAQ

The theoretical maximum push force is 318 kgf at 1.0 MPa.

The M16x1.5 adjuster screw shortens the extend stroke by up to 10 mm, giving a usable range of 90-100 mm without altering the force output. The built-in magnet allows you to mount AirTAC reed or electronic solid-state switches directly into the body grooves for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X100-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.