
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-100S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X110-100S is a double-acting compact cylinder featuring an external M16x1.5 R-thread adjuster screw. This mechanism lets you dial the extend stop down from the 110mm maximum to anywhere between 10mm and 110mm directly on the machine, completely avoiding part swaps or shims during changeovers. Retract travel remains full length.
The short riveted body saves axial mounting depth where larger profile cylinders will not fit, and a fixed NBR bumper decelerates the stroke end. This specific build includes the -S magnet for AirTAC reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 110 mm |
| Adjustable range | 10 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 110mm during product changeovers to position forming tools accurately without machining custom spacers.
Perfect for prototype lines where the exact extend point is unknown, allowing rapid mechanical adjustment before finalizing the design.
Choose this model if your application requires frequent on-site stroke tuning across a wide 10-110mm window. Confirm your setup needs a PT1/4 port, a 20mm rod with female M10x1.5 threads, and the built-in -S magnet. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the external M16x1.5 R-thread screw shortens the extend stroke by up to 100mm, giving a usable range of 10-110mm. The -S option denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.