verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 110 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke110 mm
  • Adjustable range90–110 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$124.19 $131.69Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S

The AirTAC SDAJ63X110-20S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that lets you dial the extend stop directly on your machine. You can shorten the forward stroke by up to 20 mm, yielding a usable extend range of 90 to 110 mm without changing shims or parts. Retract remains full length.

The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, and its 63 mm bore uses a PT1/4 air port with a 20 mm rod.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke110 mm
Adjustable range90 – 110 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×110Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S Is Used

sync_alt

Changeover Diverter Gates

Fine-tune the actuation length on the fly during product family changeovers, avoiding teardowns while maintaining a safe 935 N working load.

vertical_align_center

Vertical Lift Stops

Set precise upper travel limits for 79.4 kg lift fixtures, relying on the external stop rather than risking overtravel on delicate tiers.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S the Right Cylinder?

Choose this specific variant if your fixture commissioning requires precise on-machine stroke tuning across a 90 to 110 mm window.

Confirm your specs: 63 mm bore, 110 mm max stroke, 20 mm adjust window, PT1/4 port, female rod-end thread, and the -S magnet for sensing. Remember that a plain cylinder does not hold its load on air loss or when a valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 90–110 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S FAQ

The theoretical maximum push is 318 kgf at 1.0 MPa.

Turning the M16x1.5 screw shortens the extend stroke by up to 20 mm, giving an effective range of 90 to 110 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X110-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.