
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-30B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X110-30B is a compact double-acting double-rod cylinder featuring an on-site extend stop. A built-in M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 80 and 110 mm, eliminating the need for shims or part swaps during changeovers.
This variant utilizes a male M18x1.5 piston rod thread and a PT1/4 air port. Its short riveted body conserves axial mounting depth in tight machinery layouts. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning the screw sets a mechanical stop and does not function as a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 110 mm |
| Adjustable range | 80 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 110 mm to perfectly seat rough-cast parts of varying widths into a machining fixture without reprogramming tool offsets.
Set a precise mechanical lower stop for tier-layer positioning during pallet builds, relying on the fixed NBR bumper to absorb the impact of each downward cycle.
When sizing this model, evaluate your force requirements against neighbouring bores.
Choose this specific configuration if your fixture setup requires frequent trial positioning within the 80 to 110 mm window. Confirm the 63 mm bore, 110 mm maximum stroke, 30 mm adjustment range, PT1/4 port, and the male M18x1.5 rod end. Note that this SKU lacks a piston magnet, so position sensing is not possible without the -S option. Furthermore, a standard cylinder drifts when air is lost or the valve is centred; the bumper only decelerates near the end of travel and will not hold a load. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 2182.1 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The external M16x1.5 screw shortens the extend end position by up to 30 mm, giving a usable outward range of 80 to 110 mm. It acts purely as a mechanical stop and does not function as a mid-stroke lock. The cylinder will drift if air pressure is lost, so an external rod lock is required for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.