
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-50 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X110-50 is a double-acting compact cylinder featuring a 63 mm bore and an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 60 and 110 mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body saves valuable axial mounting depth where a longer conventional cylinder would fail to fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 110 mm |
| Adjustable range | 60 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M16x1.5 screw to shift the extend stop between 60 and 110 mm during product family changeovers, avoiding the downtime of mechanical shim replacement.
Iterate on prototype clamping locations by turning the adjuster to find the optimal extend distance, then lock the screw for the final 63 mm bore assembly run.
When sizing this 63 mm bore actuator, evaluate your force requirements against its neighbours.
Choose this unit if your assembly line requires frequent changeovers or trial positioning within the 60-110 mm extend window. Confirm your port size is PT1/4 and that you have specified the female M10x1.5 rod-end thread. Remember that a plain cylinder does not hold position on air loss or valve centring; for load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the external R (M16x1.5) screw mechanically shortens the forward stroke by up to 50 mm, allowing an extend range of 60 to 110 mm. It sets the end stop and does not alter the cylinder's force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.