
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-75B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X110-75B is a double-acting compact cylinder featuring a male-thread M18x1.5 piston rod and an external extend stop. By turning the R (M16x1.5) adjuster screw, you can dial the outward stroke down from the 110 mm maximum to any point between 35 and 110 mm directly at the machine, avoiding part swaps or shims. Retract travel remains full length.
The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke end, which is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Raise varying pallet weights up to a 79.4 kg safe vertical limit, tweaking the outward reach on the fly to meet different machine loading heights.
Set the exact carton flap crease depth by adjusting the mechanical stop, relying on the fixed NBR bumper to absorb the end shock at cycle completion.
It is ideal for setups requiring frequent on-site stroke tuning or changeovers. Confirm the 63 mm bore, 110 mm max stroke, 75 mm window, PT1/4 port, and the male M18x1.5 rod thread for your mounting interface. Note that a plain cylinder does not hold its load on air loss or valve centering—the piston drifts and the bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
No, this specific SKU lacks the -S code, meaning it has no piston magnet and cannot take a reed or electronic switch. You must select the -S variant to enable position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.