
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-75S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X110-75S is a double-acting compact cylinder featuring an external R (M16x1.5) adjuster screw that dials the extend stop from 35 to 110 mm directly on your machine. Retract travel stays at the full 110 mm.
Its short riveted body drastically reduces axial mounting depth where round-body or profile cylinders cannot fit. The unit relies on a fixed NBR bumper at each end to decelerate the stroke, and the included -S magnet provides compatibility with AirTAC reed or electronic switches for precise end-position detection.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X110-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 35 and 110 mm via the M16x1.5 screw to accommodate multiple part lengths on a single machining fixture without swapping components.
Fine-tune the lower stop point for varying pallet loads, using the 79.4 kg vertical lift margin to gently settle goods without needing complex shims.
Choose this specific unit if your fixture requires frequent on-site stroke tuning or changeover flexibility.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This configuration includes the S magnet option, a PT1/4 port, and a female M10x1.5 rod-end thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, runs at 30-500 mm/s, and functions in temperatures from -20 to +70 C.
Turning the external R (M16x1.5) screw shortens the extend stroke by up to 75 mm, allowing on-machine positioning between 35 mm and 110 mm. The screw acts strictly as a mechanical stop and does not alter force. The built-in S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.