
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-10 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 110 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X120-10 is a double-acting compact cylinder featuring a 63 mm bore and a 120 mm stroke. An external M16x1.5 adjuster screw lets you dial the extend end-position down to 110 mm directly on the machine, providing precise 10 mm of fine-tuning without changing parts.
The short riveted body saves valuable axial mounting depth where larger profile or round-body units fail to fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 120 mm |
| Adjustable range | 110 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke endpoint on-site to match varying package sizes on a sorting line without swapping out the entire cylinder body.
If your application requires significantly more thrust, stepping up to the SDAJ80 yields 2513.3 N at the same pressure.
Remember that a plain double-acting cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. For load-holding requirements without live pressure, install an external rod lock or a pilot-operated check valve. This configuration features a 63 mm bore, 110-120 mm adjustable extend range, a PT1/4 port, a female M10x1.5 rod-end thread, and no magnet.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the external R (M16x1.5) screw mechanically shortens the extend stroke from the 120 mm maximum down to 110 mm. This sets the physical stop position and does not alter the cylinder's thrust output.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.