
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 110 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X120-10B is a double-acting, double-rod compact cylinder featuring an external R (M16x1.5) adjuster screw. This mechanism lets you dial the extend stop down from 120 mm to 110 mm directly on your equipment, providing a 10 mm fine-tuning window without swapping shims or parts.
Designed with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders cannot fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to an -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 120 mm |
| Adjustable range | 110 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 110-120 mm extend stop on the R M16x1.5 screw during initial tooling commissioning to perfect bearing press depths without machining new spacers.
Quickly re-tune the extend endpoint within the 10 mm window during production line changeovers, leveraging the compact riveted body to fit tight multi-axis gantry spaces.
Stepping down, the SDAJ50 provides 981.7 N, whereas stepping up to the SDAJ80 yields 2513.3 N. Choose this model if your fixture requires on-site extend tuning between 110 mm and 120 mm to perfect a press fit or alignment.
Confirm your parameters: a 63 mm bore, 120 mm maximum stroke, 10 mm adjust window, and a PT1/4 air port. This SKU specifies the -B option, giving you a male M18x1.5 rod end instead of the standard female thread. Remember that a plain SDAJ does not hold position if air pressure drops or the valve centers; the bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The M16x1.5 adjuster screw sets the stop position without altering these force outputs.
No, this specific SKU lacks the -S option, meaning it has no piston magnet and cannot accept reed or electronic switches. You must select an -S variant for position sensing. Additionally, the -B option denotes a male M18x1.5 piston rod thread.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.