
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 100 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X120-20S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M16x1.5 adjuster screw lets you dial the forward stop down by 20 mm, yielding a usable extend range of 100 to 120 mm without swapping shims or parts.
Its short riveted body significantly reduces axial mounting depth compared to conventional round-body units, fitting into tight machine frames while accepting standard AirTAC compact accessories. The built-in piston magnet (-S) supports position sensing via reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 120 mm |
| Adjustable range | 100 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reposition the extend endpoint within the 20 mm window on packaging lines running mixed formats, avoiding the need to physically swap cylinders.
Choose the SDAJ63X120-20S specifically for setups requiring frequent trial positioning or changeover where the forward endpoint must be fine-tuned on the machine.
Confirm the 120 mm maximum stroke, 20 mm adjustment window, PT1/4 port, and the M10x1.5 female rod-end thread. The included magnet enables AirTAC reed or solid-state sensors. Remember that the fixed NBR bumper only decelerates the stroke end; a plain cylinder drifts when air is lost or the valve is centred. To hold a load without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa.
The external M16x1.5 screw shortens the extend stroke by up to 20 mm, giving an on-site adjustable range of 100 to 120 mm; retract remains full. The -S code indicates a built-in piston magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.