
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-30B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 120 mm on the machine — no shims, no part change.
The SDAJ63X120-30B is a double-acting compact cylinder featuring an external R (M16x1.5) adjuster screw that dials the extend end-position anywhere between 90 and 120 mm. This specific SKU uses a male M18x1.5 piston rod thread (the -B option) instead of the default female M10x1.5.
Its short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit. End-of-travel deceleration is handled strictly by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this configuration lacks a piston magnet, so it cannot support reed or electronic switches without changing to an -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 120 mm |
| Adjustable range | 90 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the actuator reach during product format changeovers to deflect different package widths accurately on the line.
Choose this 63 mm bore when the smaller 50 mm lacks thrust or the larger 80 mm is too bulky.
This model is ideal for operators needing on-site stroke tuning during frequent changeovers, as the M16x1.5 screw allows precise positioning without shims. Confirm your requirements for the 120 mm maximum stroke, 30 mm adjustment window, PT1/4 air port, and the male M18x1.5 rod end. Remember that a plain cylinder does not hold position on air loss or valve centering; the bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 adjuster screw mechanically shortens the extend stroke from the 120 mm maximum down to 90 mm without changing the force. The -B option specifies a male M18x1.5 piston rod thread instead of the standard female thread. This SKU has no magnet (-S) and cannot use sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.