
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-40B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X120-40B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the M16x1.5 adjuster screw, you can dial the outward stroke down from the 120mm maximum to anywhere within the 80-120mm window directly at the machine, eliminating the need for shims or part swaps.
This variant features a male M18x1.5 piston rod thread and lacks a piston magnet. The short riveted body significantly reduces axial mounting depth compared to traditional round-body or profile alternatives, fitting into tighter machinery footprints. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking mechanism.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X120-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 120mm down to 80mm to clamp varying fixture widths on a machining line without machining custom spacers.
Set precise downward push positions for tiering pallet layers, using the male M18x1.5 rod to secure tooling while accommodating varied pallet heights.
When sizing this 63mm bore, evaluate your force requirements against its neighbours.
Choose this specific configuration if your assembly requires frequent changeovers or trial positioning within the 80-120mm range. Confirm your setup needs the male M18x1.5 rod thread (-B) and the PT1/4 air port. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates the end of travel and does not lock the load. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 screw acts as a mechanical stop that shortens the extend stroke anywhere between 80mm and 120mm. It does not alter the cylinder's force or lock the piston mid-stroke; the cylinder drifts if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.