
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 120 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X130-10B is a double-acting compact cylinder featuring a male-thread piston rod (M18x1.5) and an external extend stop. A fixed NBR bumper decelerates the piston near the end of travel, while the M16x1.5 adjuster screw lets you dial the forward stroke down from 130 mm to 120 mm directly on your machine.
This riveted-body actuator saves valuable axial mounting depth where a larger profile cylinder will not fit. It operates between 0.15 and 1.0 MPa, and the 20 mm diameter rod handles substantial loads. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 130 mm |
| Adjustable range | 120 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M16x1.5 screw to perfectly seat a bearing within the 120-130 mm window without swapping mechanical shims during product changeovers.
Adjusts the male M18x1.5 rod extension on the fly to accommodate varying box sizes on a compact riveted-body assembly line.
Choose this model if your assembly requires precise 120-130 mm forward positioning and a male M18x1.5 rod end.
Keep in mind that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the piston drifts, and the bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your specifications: 63 mm bore, 130 mm max stroke, 10 mm adjust window, PT1/4 port, no magnet, and a male rod thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M16x1.5 screw mechanically shortens the extend stop from 130 mm down to 120 mm; it does not alter the thrust force. The fixed NBR bumper only decelerates the stroke end and is not a lock, so you need an external rod lock or pilot-operated check valve to hold a load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.