
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-30 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X130-30 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can shorten the forward stroke on-site by up to 30 mm, dialling the usable extension precisely between 100 and 130 mm without changing shims or parts.
This unit saves valuable axial mounting depth thanks to its short riveted body, fitting where larger profile cylinders cannot. End-of-travel energy is managed solely by a fixed NBR bumper that decelerates the piston, meaning it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet and therefore cannot support reed or electronic switches; adding the -S option enables sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 130 mm |
| Adjustable range | 100 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the R screw on the fly to accommodate different box heights on a packaging line, using the fixed NBR bumper to absorb the end-of-stroke shock safely.
When sizing this 63 mm bore actuator, consider the neighbouring bores to ensure optimal performance.
Engineers requiring frequent changeover or trial positioning will benefit from the 100-130 mm on-site adjustment window. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift, and the fixed bumper only decelerates near the end of the stroke. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This configuration features a PT1/4 port, a female M10x1.5 rod-end thread, and no magnet.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed of 30-500 mm/s.
The external M16x1.5 adjuster screw mechanically limits the extend stroke, allowing you to set the forward end-position anywhere between 100 and 130 mm. It does not alter the output force. The screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.