verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 130 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke130 mm
  • Adjustable range90–130 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$140.27 $147.77Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S

The AirTAC SDAJ63X130-40S is a double-acting compact cylinder featuring an external M16x1.5 R thread adjuster. This mechanism lets you dial the extend stop directly on your machine anywhere between 90 and 130 mm, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.

The short riveted body conserves axial mounting depth where space is tight, while the built-in magnet (-S) supports AirTAC reed or electronic solid-state switches for position sensing.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke130 mm
Adjustable range90 – 130 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×130Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S Is Used

sync_alt

Trial Assembly Stations

Iteratively test engagement depths on new assemblies by adjusting the end stop on the fly, relying on the fixed NBR bumper to absorb the impact of repeated test strokes.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S the Right Cylinder?

It is the right choice for setups requiring on-site stroke tuning without sacrificing power. Confirm your parameters: 63 mm bore, 130 mm max stroke with a 40 mm window, PT1/4 port, female M10x1.5 rod thread, and the -S magnet. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed NBR bumper only decelerates the stroke end and does not lock the load. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 90–130 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S FAQ

The M16x1.5 R screw mechanically shortens the extend endpoint down to 90 mm from the 130 mm maximum without altering the output force. The included -S magnet works with AirTAC reed or electronic switches to confirm end positions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X130-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.