
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-50 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X130-50 is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can set the extend end-position anywhere between 80 and 130 mm directly on your machinery, eliminating the need for shims or part swaps.
Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, fitting into tight machine footprints. The unit relies on a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; adding an -S variant provides that sensing capability.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 130 mm |
| Adjustable range | 80 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend position for different box heights on a changeover, letting the fixed NBR bumper absorb the end shock while maintaining a compact profile.
Set the mechanical stop precisely for a 79.4 kg vertical lift, tweaking the R screw to find the exact engagement height before finalizing the machine setup.
When sizing this model, evaluate your force requirements against neighbouring bores.
Choose this cylinder if your application requires on-site stroke tuning between 80 and 130 mm. Confirm your specifications: 63 mm bore, 130 mm maximum stroke, 50 mm adjust window, PT1/4 port, female rod-end thread (M10x1.5), and no magnet. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end, and the adjuster acts as a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
Turning the R (M16x1.5) screw shortens the extend stroke by up to 50 mm, allowing on-machine positioning between 80 and 130 mm without changing force. This specific SKU has no piston magnet and cannot take a switch; selecting the -S option adds a magnet compatible with AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.