
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-50B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 80 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X130-50B is a compact double-acting double-rod cylinder built for tight axial footprints, featuring a short riveted body that saves mounting depth where larger profile cylinders fail to fit. A male M18x1.5 thread piston rod handles the linkage, while the bore dictates a PT1/4 air port. Operating pressure spans 0.15 to 1.0 MPa, with a proof rating of 1.5 MPa across a -20 to +70 C temperature range.
An external M16x1.5 R adjuster screw lets you dial the extend end-position down from the 130 mm maximum to 80 mm directly on the machine, eliminating shims or part swaps during commissioning. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X130-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 130 mm |
| Adjustable range | 80 – 130 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Tune the gate extend position on the fly during product changeover, using the male M18x1.5 rod to push packages accurately at line speeds up to 500 mm/s.
Choose this specific model when setups demand frequent on-machine stroke tuning across an 80 to 130 mm window. Confirm your specifications: 63 mm bore, 130 mm max stroke, 50 mm adjust window, PT1/4 port, male M18x1.5 rod (-B), and no magnet.
Remember that a plain SDAJ does not hold position or load when air is lost or the directional valve centres. The piston will drift, and the fixed NBR bumper only decelerates near the stroke end—it is never a lock or brake. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatics schematic.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, tolerates -20 to +70 C, and runs at speeds of 30-500 mm/s.
Turning the M16x1.5 R screw shortens the extend stroke by up to 50 mm, allowing on-machine positioning between 80 mm and 130 mm; retract remains full. This SKU lacks a piston magnet, so it cannot take a switch. The -S variant adds a magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.