
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X140-30 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 110 to 140 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X140-30 is a double-acting, double-rod compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 110 to 140 mm directly on your equipment. The short riveted body drastically reduces axial mounting depth where larger profile or round-body units cannot fit.
This specific 140 mm stroke is a non-standard, made-to-order length exceeding the 130 mm maximum standard for this bore. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorbers. Note this SKU lacks a piston magnet, so position sensing is not supported without upgrading to an -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X140-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 140 mm |
| Adjustable range | 110 – 140 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×140 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 110-140 mm extend stop during press tooling changeovers to accommodate different material thicknesses without machining custom spacers.
Adjust the actuation reach on packaging conveyor diverters on the fly, fine-tuning the pusher end point to handle varying carton depths efficiently.
If your application requires significantly more thrust, the SDAJ80 offers 2513.3 N at the same pressure. Engineers needing frequent line changeovers or trial positioning will benefit from the 30 mm on-site extend tuning window. Confirm the PT1/4 port, female M10x1.5 rod thread, and the 110-140 mm adjust range fit your envelope.
A plain SDAJ does not hold a load when air is lost or the directional valve centers; the piston drifts and the fixed bumper only decelerates near the end of the stroke. For vertical or suspended loads requiring fail-safe holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the external R (M16x1.5) screw mechanically shortens the extend stroke by up to 30 mm, yielding a usable 110-140 mm range without altering force. This specific SKU lacks a piston magnet; adding the -S option enables compatibility with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.