
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X140-30S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 110 to 140 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X140-30S is a double-acting compact cylinder featuring an external adjustable extend stop. A built-in piston magnet (-S) enables position sensing with AirTAC reed or electronic switches. Because the 140 mm stroke exceeds the 130 mm standard maximum for this bore, this unit is supplied as a non-standard, made-to-order configuration.
Turning the R (M16x1.5) adjuster screw lets you dial the extend end-position anywhere between 110 and 140 mm directly on your machine, eliminating the need for shims or part swaps. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X140-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 140 mm |
| Adjustable range | 110 – 140 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×140 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for packaging lines running multiple carton sizes, allowing operators to shorten the extend stop on the machine without dismantling the 63 mm bore assembly.
When sizing this actuator, evaluate your thrust requirements against neighbouring bores.
Choose this specific model if your fixture requires frequent changeovers or trial positioning within the 110-140 mm extend window. Confirm your porting matches the bore-fixed PT1/4 thread, and note the female M10x1.5 rod-end thread. Remember that a plain cylinder does not hold position upon air loss or valve centring; the fixed NBR bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The R (M16x1.5) screw shortens the extend stroke by up to 30 mm, yielding a usable 110-140 mm range without changing the output force. The included -S magnet works with AirTAC reed or electronic solid-state switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.