
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X140-50S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 140 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X140-50S is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, technicians can shorten the extend stroke on-site across a 90 to 140 mm window without swapping shims or parts.
Its short, riveted body drastically saves axial mounting depth where a larger profile cylinder cannot fit. This specific 140 mm stroke is a non-standard, made-to-order length exceeding the 130 mm maximum standard for a 63 mm bore. The unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, while a fixed NBR bumper at each end absorbs end-of-travel shock without functioning as a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X140-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 140 mm |
| Adjustable range | 90 – 140 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×140 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 90 to 140 mm via the R screw during short-batch changeovers, delivering precise 1558.6 N clamping force without swapping mechanical spacers.
Lift varying workpiece sizes up to a safe 79.4 kg vertical load, using the external adjuster to set exact ejection heights on the fly while maintaining full retract speed.
Tune the push stroke for different carton depths directly at the machine, relying on the fixed NBR bumper to absorb the 30-500 mm/s travel shock at the end of each cycle.
When sizing this unit, evaluate your force requirements bidirectionally.
Select this model if your assembly line requires frequent on-site stroke tuning between 90 and 140 mm to accommodate changing part heights. Confirm your setup handles the PT1/4 port, the Ø20 mm rod with a female M10x1.5 end thread, and the -S magnet for sensing. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa, runs at 30-500 mm/s, and functions in temperatures from -20 to +70 C.
The included -S magnet enables position sensing using AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.