verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 130 to 150 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke150 mm
  • Adjustable range130–150 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$142.34 $149.84Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20

The AirTAC SDAJ63X150-20 is a double-acting compact cylinder featuring an external R (M16x1.5) adjustment screw that dials the extend stop directly on your machine between 130 and 150 mm. This specific 150 mm unit exceeds the 130 mm standard stroke ceiling for a 63 mm bore, making it a non-standard, made-to-order item.

Its short riveted body drastically reduces axial mounting depth, fitting where round-body alternatives cannot. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note that this SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke150 mm
Adjustable range130 – 150 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×150Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20 Is Used

vertical_align_center

Vertical Lift Positioning

Ideal for raising a 79.4 kg payload where the exact top dead center must be dialed within the 20 mm window, using the fixed NBR bumper to soften the final impact.

factory

Compact Assembly Stations

Fits into tight axial footprints on dense assembly lines, providing 318 kgf max push while permitting quick extend length adjustments for varied product heights.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20 the Right Cylinder?

Confirm your requirements for the 63 mm bore, 150 mm stroke, 20 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and the absence of a magnet.

This model excels in setups requiring on-site stroke tuning to perfect end positions without shims. Remember that a plain SDAJ does not hold a load when air is lost or the valve centers; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 130–150 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20 FAQ

The theoretical maximum push is 318 kgf at 1.0 MPa.

The M16x1.5 R screw mechanically shortens the extend stroke from the 150 mm maximum down to 130 mm without changing the force output. This specific SKU lacks a piston magnet; to use reed or electronic switches you must specify the -S option.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X150-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.