
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 130 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X150-20S is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine. You can tune the outward travel anywhere between 130 and 150 mm without swapping shims or parts.
This unit includes a built-in piston magnet for AirTAC reed or electronic switches. Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. Note that the 150 mm stroke exceeds the 130 mm standard maximum for a 63 mm bore, making this a made-to-order configuration. End-of-stroke deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 150 mm |
| Adjustable range | 130 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Speed up production line changeovers by turning the M16x1.5 screw to shift the extend endpoint by up to 20 mm, avoiding the need to physically swap cylinder hardware.
Choose this specific model if your fixture changeovers require frequent, on-site extend tuning across the 20 mm window.
Confirm the 63 mm bore, 150 mm maximum stroke, 20 mm adjust window, and PT1/4 port match your pneumatic supply. The -S code denotes the integrated magnet for position sensing, and the rod end features a female M10x1.5 thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The external M16x1.5 screw shortens the extend stroke by up to 20 mm, giving a usable range of 130 to 150 mm; retract remains full. The built-in -S magnet allows you to track position using AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.