verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 100 to 150 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke150 mm
  • Adjustable range100–150 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$157.22 $164.72Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S

The AirTAC SDAJ63X150-50S is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend end-position anywhere between 100 and 150 mm. The short riveted body drastically reduces axial mounting depth, fitting where larger profile cylinders cannot.

This specific 150 mm stroke configuration exceeds the 130 mm standard maximum for a 63 mm bore, making it a non-standard, made-to-order item. It includes a built-in piston magnet (-S) for position sensing and relies on a fixed NBR bumper at each end to decelerate the stroke. The bumper is not an adjustable air cushion, so external shock absorbers are recommended for high-energy approaches.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke150 mm
Adjustable range100 – 150 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×150Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S Is Used

factory

Press Die Setup

Fine-tune the extend stop during press tooling setup to test striking depth, relying on the fixed NBR bumper to decelerate the 79.4 kg vertical load at the end of travel.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S the Right Cylinder?

Choose this model when your fixture requires on-site stroke tuning across a 50 mm window via the PT1/4 port and female M10x1.5 rod thread. Remember that a plain cylinder does not hold position on air loss or when a valve is centered; the piston drifts. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 100–150 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S FAQ

It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

The external M16x1.5 screw shortens the extend stroke by up to 50 mm, yielding a usable 100-150 mm range without changing force. The included -S magnet works with AirTAC reed or electronic switches for position sensing, while the fixed NBR bumper decelerates the stroke end.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-50S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X150-50S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.