
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-75SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 75 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X150-75SB is a double-acting, double-rod compact cylinder featuring an on-machine adjustable extend stop. By turning the R (M16x1.5) external screw, you can dial the forward stroke anywhere between 75 mm and 150 mm without swapping shims or parts.
This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M18x1.5) for secure tooling attachment. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. Please note the 150 mm stroke exceeds the 130 mm standard maximum for this 63 mm bore, making it a non-standard, made-to-order configuration. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 150 mm |
| Adjustable range | 75 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the R screw during line changeovers to push different carton sizes onto secondary tracks without changing out the entire actuator assembly.
When sizing this bore, evaluate your force requirements bidirectionally. If your application demands significantly more thrust, stepping up to an SDAJ80 provides 2513.3 N at the same pressure.
This specific model is ideal for operators who require frequent on-site stroke tuning between 75 and 150 mm to accommodate changeovers or trial positioning. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the piston will drift, and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Configuration confirmed: 63 mm bore, 150 mm stroke, 75 mm window, PT1/4 port, -S magnet, and -B male rod thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The external M16x1.5 screw shortens the forward stroke by up to 75 mm, allowing usable extend lengths between 75 and 150 mm. The included -S magnet enables position sensing using AirTAC reed or electronic switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.