verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke20 mm
  • Adjustable range10–20 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$63.24 $70.74Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10

The AirTAC SDAJ63X20-10 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop directly on your machine between 10 and 20 mm.

Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, fitting easily into cramped machine frames. The unit relies on a fixed NBR bumper to absorb end-of-stroke shock and operates pneumatically across a 30-500 mm/s speed range without any adjustable air cushioning.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke20 mm
Adjustable range10 – 20 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×20Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10 Is Used

precision_manufacturing

Short-Stroke Clamping

Dial in the exact 10-20 mm clamping reach on machining fixtures to accommodate raw material variances without swapping out actuator hardware.

vertical_align_center

Trial Positioning Stops

Safely test vertical lift positions up to 79.4 kg by adjusting the mechanical end-stop in 1 mm increments before finalizing the machine cycle.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10 the Right Cylinder?

This specific SKU ships without a piston magnet, so it cannot host reed or electronic switches; choose the -S variant if your fixture requires position sensing. Furthermore, a standard cylinder cannot hold a load if air pressure drops or the valve centres—add an external rod lock or pilot-operated check valve for secure vertical holding. Confirmed parameters: 63 mm bore, 20 mm stroke, 10 mm window, PT1/4 port, female M10x1.5 rod thread.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–20 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10 FAQ

Turning the external M16x1.5 screw mechanically shortens the extend end-position from the 20 mm maximum down to 10 mm. It acts purely as a physical stop and does not alter the pneumatic force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X20-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.