
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10SH is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X20-10SH is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. By turning the external M16x1.5 adjuster screw, you set the outward stroke anywhere between 10 and 20 mm without changing parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and uses high-temperature FKM seals. The short riveted body minimizes axial mounting depth, while a fixed NBR bumper decelerates the stroke end. The adjuster is a mechanical stop, not a mid-stroke lock, so external hardware is required to hold loads without live air pressure.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10SH |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 10 to 20 mm extend position during machine commissioning to set forming tools precisely without machining new spacers.
Set a precise lower endpoint for a 79.4 kg vertical lift, relying on the external screw to fine-tune the drop distance safely.
Stepping down, the SDAJ50 provides 981.7 N; moving up, the SDAJ80 yields 2513.3 N.
Choose this model when machine setup requires dialling in a precise 10 to 20 mm extend position. Confirm the 63 mm bore, 20 mm maximum stroke, 10 mm adjust window, PT1/4 port, male M18x1.5 rod thread, and the -S magnet. Remember that a plain cylinder drifts on air loss; install an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend stroke by up to 10 mm, giving a usable range of 10 to 20 mm. The included -S magnet allows tracking via AirTAC reed or electronic switches. The screw only sets the end stop; it does not lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.