verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke25 mm
  • Adjustable range15–25 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$76.73 $84.23Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S

The AirTAC SDAJ63X25-10S is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw. Turning this R thread lets you dial the extend end-position down by 10 mm, yielding a usable extend window of 15 to 25 mm directly on the machine.

The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. This unit includes a built-in piston magnet for position sensing with AirTAC reed or electronic switches.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke25 mm
Adjustable range15 – 25 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×25Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 15 to 25 mm via the M16x1.5 screw to set exact clamping depth for varying part heights during production line changeovers.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S the Right Cylinder?

Choose this specific model when you need on-site stroke tuning between 15 and 25 mm during frequent machine changeovers.

Confirm the 63 mm bore, 25 mm maximum stroke, 10 mm adjust window, PT1/4 port, and the female M10x1.5 rod-end thread suit your mounting footprint. The -S magnet code is present for electronic or reed sensing. Note that a plain cylinder does not hold a load if air pressure drops or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–25 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S FAQ

It operates between 0.15 and 1.0 MPa, runs at 30-500 mm/s, and functions in temperatures from -20 to +70 C.

The external M16x1.5 R screw shortens the extend stroke by up to 10 mm, giving an adjustable range of 15 to 25 mm. Retract remains full stroke. The built-in -S magnet allows tracking by AirTAC reed or electronic solid-state switches, and the fixed NBR bumper decelerates the end of travel without acting as a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X25-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.