
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X25-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M16x1.5 adjuster screw, you can dial the extend position down from the 25mm maximum to as low as 5mm directly on your machine. This on-site tuning eliminates the need for shims or part changes during setup.
Built with a short riveted body, this unit saves axial mounting depth where a larger profile cylinder will not fit. It relies on a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Because this configuration includes the S option, it has a built-in piston magnet for AirTAC reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dials the extend stop from 5 to 25 mm during tooling changeovers, letting operators set part clamping depth without machining custom spacers.
When sizing this 63mm bore, check both neighbouring options. Choose this SDAJ63X25-20S if your changeover process requires precise extend positioning between 5 and 25 mm. It carries the S magnet for sensing and a female M10x1.5 rod thread. The PT1/4 port matches the bore standard.
Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts. The fixed NBR bumper only decelerates near the stroke end and is never a lock.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 2182.1 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The M16x1.5 screw shortens the extend stop by up to 20 mm, giving a usable extend range of 5 to 25 mm while retract remains full. The S option includes a piston magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.