
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X25-20SB is a compact double-acting double-rod cylinder featuring an external R (M16x1.5) adjustment screw. This mechanism lets you dial the extend stop down to any position between 5 and 25 mm directly on your machine, entirely eliminating the need for shims or part swaps during changeovers.
Designed to save axial mounting depth where round-body or profile cylinders will not fit, the short riveted body integrates easily into tight fixtures. This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 threaded rod end. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for clamping variable part thicknesses, using the 5-25 mm adjust window to dial the exact 1558.6 N holding force without reprogramming the machine.
Speeds up product changeovers on packaging lines by allowing operators to manually turn the R screw to shift the extend stop, avoiding slow software adjustments.
When sizing this unit, evaluate both neighbouring bores against your real force needs. Choose this specific model if your fixture requires precise on-site extend tuning between 5 and 25 mm.
Confirm your parameters before ordering: a 63 mm bore, 25 mm maximum stroke, 20 mm adjust window, and PT1/4 air port. This SKU includes the -S magnet for position sensing and the -B male M18x1.5 piston rod. Note that a plain cylinder does not hold its load if air pressure drops or the valve is centred—the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa the push increases to 2182.1 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The external R (M16x1.5) screw shortens the extend stroke by up to 20 mm, giving a usable range of 5 to 25 mm. The included -S magnet allows you to track position using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.