
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-10S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X30-10S is a double-acting compact cylinder featuring a 63 mm bore and an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 20 and 30 mm directly on the machine, eliminating the need for shims or part swaps during setup.
This riveted-body design saves significant axial mounting depth where a larger profile cylinder cannot fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion. Equipped with a built-in piston magnet, the unit supports AirTAC reed or electronic switches for end-of-stroke sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 mm down to 20 mm via the M16x1.5 screw to accommodate varying raw stock thicknesses on a milling fixture without swapping actuators.
Adjust the extend endpoint within the 10 mm window to precisely set a sorting gate angle for mixed product lines, using the built-in magnet for electronic switch feedback.
Stepping down to an SDAJ50 yields 981.7 N, whereas stepping up to an SDAJ80 provides 2513.3 N.
Choose this specific configuration when your fixture requires on-site stroke tuning within the 20-30 mm window. Confirm your setup needs a PT1/4 port, a 20 mm piston rod, and the female M10x1.5 rod-end thread. The included -S magnet enables position sensing, but remember that a plain cylinder drifts if air pressure is lost; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the external M16x1.5 screw shortens the extend stroke by up to 10 mm, allowing usable endpoints between 20 and 30 mm. The -S option denotes a built-in piston magnet designed to trigger AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.