
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-10SH is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X30-10SH is a compact double-acting double-rod cylinder featuring an external extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke on-site from 20 to 30 mm without changing parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and uses fluororubber (FKM) seals for heightened fluid resistance. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration relies on a fixed NBR bumper, which slows the piston near the end but does not function as a mid-stroke lock or an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-10SH |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dialing the extend stop down to 21 mm lets operators tune clamping depth on the fly for varied raw stock without swapping cylinders.
Production line format changes are handled by turning the M16x1.5 adjuster to shift the extend endpoint between 20 and 30 mm instantly.
Choose this specific model if your fixture requires precise outward positioning between 20 and 30 mm during setup or changeover. Confirm the 63 mm bore, 30 mm maximum stroke, 10 mm window, PT1/4 port, male M18x1.5 rod thread, and the included magnet. Remember that a standard cylinder drifts if air pressure drops; utilize an external rod lock or pilot-operated check valve to suspend loads safely without live pressure.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s.
The M16x1.5 external screw shortens the extend endpoint from the 30 mm maximum down to 20 mm, allowing on-machine tuning without shims. The included -S magnet enables position sensing using AirTAC reed or solid-state electronic switches mounted in the body grooves. The adjuster only sets the end stop; it does not alter force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.