
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X30-20SB is a double-acting, double-rod compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine. You can set the outward stroke anywhere between 10 and 30 mm without swapping shims or parts, making it ideal for trial positioning and rapid changeovers. Retract remains at the full stroke length.
The short riveted body minimizes axial mounting depth where larger profile cylinders cannot fit. This unit includes a built-in magnet for AirTAC reed or electronic switches and a male M18x1.5 piston rod end.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rapidly reposition the extend endpoint for different product heights on a packaging line, using the 20 mm adjustment window instead of changing hardware.
Safely elevate a 79.4 kg load by setting a precise mechanical stop, keeping the male M18x1.5 rod clear of frame obstructions during retraction.
Choose this specific model if your fixture requires on-site stroke tuning within the 10-30 mm window.
Confirm the 63 mm bore, 30 mm max stroke, 20 mm adjust window, PT1/4 port, male M18x1.5 rod thread, and the -S magnet for sensing. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed NBR bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The external M16x1.5 screw shortens the extend stroke by up to 20 mm, yielding a usable 10-30 mm range. It sets the mechanical stop without changing force. The built-in -S magnet allows tracking by AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.