
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-20SB is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X35-20SB is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop from 15 to 35 mm. The short riveted body minimizes axial mounting depth, fitting easily where round-body or profile cylinders cannot.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M18x1.5 piston rod thread. End shock is managed by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 15-35 mm extend stop on the fly to accommodate different material thicknesses during production line changeovers without replacing hardware.
Fine-tune the male M18x1.5 rod extension to press cartons of varying heights, ensuring consistent seal pressure without overtravel.
This model is ideal for operators needing on-site stroke tuning during setup-heavy changeovers without swapping shims or parts. Confirm your requirements for the 63 mm bore, 35 mm maximum stroke, 20 mm adjust window, PT1/4 port, male M18x1.5 rod, and the integrated magnet. Note that a plain cylinder does not hold position on air loss or valve centering; the bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The M16x1.5 R screw mechanically shortens the extend stop from the 35 mm maximum down to 15 mm without changing the force output. The built-in magnet allows tracking via AirTAC reed or electronic switches, while the fixed NBR bumper handles end deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.