
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-30S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X35-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the extend position anywhere between 5 and 35 mm directly on the machine without changing parts.
This 63 mm bore unit saves axial mounting depth through its short riveted body, fitting where larger profile cylinders cannot. It carries a built-in piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper decelerates the stroke end. The screw is a positioning stop, not a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 35 mm |
| Adjustable range | 5 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the M16x1.5 screw on the line to alter the folding arm extension for different box depths, ensuring crisp creases at 30-500 mm/s.
Choose this cylinder when your fixture requires frequent on-site stroke tuning across a 5-35 mm window.
Confirm the 63 mm bore, 35 mm maximum stroke, 30 mm adjust window, and PT1/4 port. This configuration includes the -S magnet for position sensing and a female M10x1.5 rod-end thread. Remember that a plain cylinder drifts when air is lost or the valve centers; add an external rod lock or pilot-operated check valve if the application demands load holding.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa.
The M16x1.5 R screw shortens the extend stop by up to 30 mm, yielding a usable 5-35 mm extend range. The included -S magnet works with AirTAC reed or electronic switches for position sensing; the adjuster only sets the stop and does not lock mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.